Rollpedia

Sourced · Nothing sold on this site · 21+

Rolling Papers

Materials, sizes, safety, formats and how to choose.

Cones

Pre-rolled cone sizes and how to fill them.

Filters & Tips

Tip materials, slim vs regular, and how to use them.

Machines & Tubes

Rollers, tube-filling injectors and empty tubes.

Pipes

Pipe types, pipe filters and how to keep one clean.

Gear & Storage

Grinders, trays, storage, lighters and matches.

Category: Machines & Tubes

  • How to Use a Cigarette Tube-Filling Machine (Injector)

    RE
    By Rollpedia Editorial•

    •

    8–10 minutes read
    ✓ Fact-reviewed

    At a glance

    • A tube-filling machine (injector) pushes loose tobacco into an empty cigarette tube to produce a finished cigarette.
    • The basic cycle: fill the tobacco chamber, slide an empty tube onto the nozzle, and push or crank the handle to inject the tobacco into the tube.
    • Most jams are caused by tobacco that is too moist, too coarsely cut, or packed too tightly in the chamber.
    • Under-filled tubes usually mean too little tobacco was loaded or the tobacco was too dry and compressed during injection.
    • Manual injectors require no electricity — the entire process is mechanical.

    Read more

  • How to Use a Rolling Machine (Step by Step)

    RE
    By Rollpedia Editorial•

    •

    8–10 minutes read
    ✓ Fact-reviewed

    At a glance

    • A rolling machine (roller) uses two parallel rollers and a flexible belt or apron to wrap tobacco in a rolling paper, producing a finished cigarette.
    • The basic cycle: open the rollers, spread tobacco evenly along the chamber, close the rollers and spin them to shape the tobacco, feed in a rolling paper (gummed edge up, facing you), and roll again to seal.
    • Common problems — torn paper, loose rolls, uneven fill — are usually caused by overfilling, incorrect paper placement, or tobacco that is too dry or too moist.
    • Most manual rolling machines accommodate standard rolling paper widths (1 1/4 or king size).

    Read more

  • Cigarette Tube Sizes and Types Explained

    RE
    By Rollpedia Editorial•

    •

    8–10 minutes read
    ✓ Fact-reviewed

    At a glance

    • Cigarette tubes are pre-made paper cylinders with a filter already attached — you fill them with tobacco using a tube-filling machine (injector).
    • The two main sizes are king size (84 mm total length, approximately 58–59 mm tobacco column) and 100s (100 mm total length).
    • Tube types include standard filtered, carbon-filtered, unbleached/biodegradable, and flavor-capsule (“click”) tubes.
    • Filter length on most tubes is 15–20 mm. Carbon-filtered tubes contain activated carbon granules in the filter.
    • Tubes are designed to work with injector machines — they are not designed to be filled by hand.

    Read more